China Angle Steel Tower Manufacturers Suppliers Factory - Customized Angle Steel Tower

What Is an Angle Steel Tower?

An Angle Steel Tower is a lattice-type communication tower assembled from steel angle members and bolted connections.
Compared with solid-section structures, the open lattice configuration reduces exposed surface area while providing a framework capable of carrying vertical loads and lateral loads generated by wind and mounted equipment.
The tower is generally divided into sections for manufacturing, transportation and site assembly. Individual members are fabricated, identified and supplied according to the approved tower design so that the structure can be assembled in the intended sequence.
For telecom projects, the tower itself is only one part of the structural system. Antenna brackets, working platforms, cable supports, aviation or obstruction-marking requirements, access systems and foundation connections may also need to be coordinated with the tower design.

Four-legged Lattice Tower
Tower Type: four-legged lattice tower Country of origin: ChinaManufacturer: Qingdao BEST Steel Structure Co., Ltd.Material: carbon steel Q235 Q355 Q420Surface Treatment: Hot dip galvanizing or zinc
Telecom Lattice Tower
Tower Type: telecom lattice tower Country of origin: ChinaManufacturer: Qingdao BEST Steel Structure Co., Ltd.Material: carbon steel Q235 Q355Surface Treatment: Hot dip galvanizing or zinc
A Roof-top Telecommunication Tower
A rooftop telecommunication towerType of Tower: A rooftop telecommunication tower Country of origin: ChinaManufacturer: Qingdao BEST Steel Structure Co., Ltd.Material: angle carbon steel Q235 Q355
35M Telecom 4-Legged Galvanized Angular Steel Towers
Type of Tower: 35M Telecom 4-Legged Galvanized Angular Steel Towers Country of origin: ChinaManufacturer: Qingdao BEST Steel Structure Co., Ltd.Material: angle carbon steel Q235 Q355 B　Surface
25M Galvanized Angle Steel Microwave Communication Tower
Type of Tower: 25M Galvanized Angle Steel Microwave Communication Tower Country of origin: ChinaManufacturer: Qingdao BEST Steel Structure Co., Ltd.Material: angle carbon steel Q235 Q355 B　Surface
Telecom Angle Steel Tower
Type of Tower: Telecom angle steel Tower Country of origin: ChinaManufacturer: Qingdao BEST Steel Structure Co., Ltd.Material: angle carbon steel Q235 Q355 B　Surface Treatment: Hot dip galvanizing or
60M Angle Steel Gsm Microwave Telecom Tower
Type of Tower Type: 60M Angle steel GSM Microwave Telecom Tower Country of origin: ChinaManufacturer: Qingdao BEST Steel Structure Co., Ltd.Material: angle carbon steel Q235 Q355 B　Surface Treatment:
Communication Angle Steel Tower
Type of Tower Type: Communication Angle Steel Tower Country of origin: ChinaManufacturer: Qingdao BEST Steel Structure Co., Ltd.Material: angle carbon steel Q235 Q355 B　Surface Treatment: Hot dip
Angle Steel Telecommunication Tower
Tower Type: angle steel telecommunication tower Country of origin: ChinaManufacturer: Qingdao BEST Steel Structure Co., Ltd.Material: carbon steel Q235 Q355 B　Surface Treatment: Hot dip galvanizing
Lattice Telecommunication Tower
Tower Type: lattice telecommunication tower Country of origin: ChinaManufacturer: Qingdao BEST Steel Structure Co., Ltd.Material: carbon steel Q235 Q355Surface Treatment: Hot dip galvanizing or zinc

Why Use an Angle Steel Lattice Tower?

The main purchasing advantage of an angle steel tower is its suitability for engineered, modular tower structures.

Bolted Sectional Construction:

The tower can be divided into transportable sections and assembled at the installation site using bolted connections. This simplifies logistics for projects where transporting a fully assembled tower is impractical.

Configurable Structural Arrangement:

Leg members, bracing members, cross-sections, platforms and equipment supports can be engineered around the required tower height and loading conditions.

Suitable for Telecom Equipment:

The lattice structure provides multiple locations for mounting antennas, cable supports and other communication equipment, subject to the structural design and equipment loading requirements.

Practical for Project-Based Procurement:

Rather than selecting a consumer-style standardized product, telecom buyers can specify the tower according to site conditions, equipment loads, design wind speed, required height and applicable standards.

Angle Steel Tower Selection Guide

Selecting a tower should start with the site and equipment requirements, not simply the nominal tower height.

Determine the Required Tower Height

Tower height affects structural loading, equipment coverage, wind exposure, foundation requirements and transportation. The request for quotation should clearly state the required overall height or the required antenna mounting elevations. If several antenna elevations are required, provide the intended mounting positions so that the tower structure and platforms can be coordinated accordingly.

Define Wind Design Conditions

Wind is one of the key inputs for tower structural design. The project specification should identify the applicable design wind speed, wind region or other required environmental design criteria. The selected design basis should be used consistently for the tower structure and mounted equipment. A tower that is adequate for one location cannot automatically be considered suitable for another location with different wind conditions.

Calculate Antenna and Equipment Loading

The request for quotation should identify the equipment to be mounted on the tower, including where applicable:
Panel antennas
Microwave antennas
Radio units
Remote radio units
Dish antennas
Cable systems
Platforms and maintenance equipment
Antenna dimensions, weight, mounting elevations and projected wind area can affect the structural design.

Confirm Tower Configuration

The buyer should specify or approve:
Tower height
Number and arrangement of legs
Leg angle sections
Bracing arrangement
Face width or base dimensions
Section lengths
Working platforms
Rest platforms
Ladder or climbing system
Antenna mounting arrangements
Cable supports
Access and safety components
The exact configuration should follow the approved engineering design rather than a generic tower template.

Angle Steel Tower Manufacturing Process

A project-oriented tower supply requires more than cutting and welding steel members. Dimensional control, hole positioning, member identification and corrosion protection all affect field assembly.

35M Telecom 4-Legged Galvanized Angular Steel Towers

Engineering Review: Project drawings and technical specifications are reviewed before production. Key inputs include tower geometry, member sizes, connection details, antenna supports, platforms, access systems and foundation interfaces. Any unresolved technical points should be clarified before fabrication.

Steel Material Preparation: Steel angle sections and other specified structural components are prepared according to the approved fabrication drawings. Material grade and traceability requirements should follow the project specification.

Cutting and Hole Processing: Members are cut to the required dimensions and bolt holes are processed according to fabrication drawings. Hole position and dimensional accuracy are particularly important because the tower is assembled through bolted connections in the field.

Component Identification: Individual members and tower sections should be identified according to the approved drawings or bill of materials. Clear identification helps installers locate the correct components during site assembly and reduces the risk of installation errors.

Trial Assembly Where Required: For projects with complex configurations or strict dimensional requirements, selected sections or assemblies may be checked before shipment. The appropriate inspection scope should be agreed during project engineering.

Surface Treatment: Steel components receive hot-dip galvanizing or another specified corrosion-protection treatment. The required coating standard, coating thickness and inspection method are stated in the purchase specification.

Final Inspection and Packing: Before dispatch, supplied components are checked against the approved drawings and packing list. Members, bolts, accessories and small components are packed and identified to support site receiving and installation.

Quality Control Points Buyers Should Check

For an Angle Steel Tower, product quality is not determined by steel appearance alone.

Structural Material: Confirm the material specification and required material documentation for the structural steel.

Member Dimensions: Check angle section dimensions, member lengths and other critical fabrication dimensions against the approved drawings.

Bolt Holes: Hole diameter, spacing and positioning need to correspond to the connection design. Poor hole alignment can create installation problems even when the individual steel members appear acceptable.

Bolted Connections: Confirm bolt grade, dimensions, coating and associated nuts and washers against the project specification.

Galvanizing: Where hot-dip galvanizing is specified, inspection addresses the required coating specification and surface condition.

Drawing-to-Product Consistency: The manufactured tower corresponds to the approved general arrangement, fabrication drawings and bill of materials.

Packing Completeness: A complete packing list identifies tower members, bolts and accessories so the receiving team can check the shipment before installation.

Typical Applications

Cellular Base Stations:

Supporting antenna arrays used for cellular network infrastructure, including network expansion and capacity upgrades.

4G and 5G Infrastructure:

Providing mounting positions for cellular antennas, radio equipment and associated cable systems where structural and loading requirements are satisfied.

Microwave Communication:

Configuring structures to carry microwave dishes and their associated mounting systems subject to required wind and structural calculations.

Rural and Remote Network Coverage:

Sectional construction and field assembly characteristics suitable for communication infrastructure projects where logistics need careful consideration.

Network Expansion and Retrofit Projects:

Assessing existing tower structural capacity and remaining load margin before adding new antennas, equipment or elevations.

FAQ

Q: What is an Angle Steel Tower?

A: An Angle Steel Tower is a lattice communication tower assembled primarily from steel angle members and bolted connections. It is commonly used for mounting antennas and other wireless communication equipment.

Q: Is an Angle Steel Tower suitable for 4G and 5G sites?

A: It can be suitable for 4G and 5G infrastructure when the tower is structurally designed for the required antenna configuration, equipment loads, wind conditions and installation requirements.

Q: What information is needed to quote an Angle Steel Tower?

A: The most useful information includes tower height, site or design wind conditions, antenna and microwave loading, platform requirements, access system, steel and galvanizing specifications, applicable standards and required quantity.

Q: Can the tower be customized?

A: Yes. Telecom tower configurations are commonly project-specific. Height, member arrangement, bracing, platforms, antenna supports, access systems and other details can be coordinated with approved project drawings and specifications.

Q: Does the tower price include the foundation?

A: Not necessarily. Foundation design and foundation-related components should be clearly separated in the quotation. The buyer should confirm whether anchor bolts, base plates or other foundation interface components are included.

Q: Are antenna brackets included?

A: They can be included when specified, but they should not be assumed to be part of the basic tower structure. Antenna type, dimensions, weight and mounting position should be provided for proper specification.

Q: What galvanizing is used for Angle Steel Towers?

A: Hot-dip galvanizing is commonly specified for outdoor steel telecom structures because it provides corrosion protection. The applicable galvanizing standard, coating requirements and inspection criteria should be confirmed in the project specification.

Q: Can an existing tower be upgraded with additional antennas?

A: Potentially, but additional loading should not be added based only on the tower's original height or appearance. The existing structure should be assessed against the proposed antenna loads, wind conditions and remaining structural capacity.

Q: How are Angle Steel Towers transported?

A: The tower is normally divided into sections and individual structural members for transportation. Packing dimensions, member identification and shipment weight should be considered when preparing the logistics plan.

Qingdao BEST Steel Structure Co., Ltd. is one of the most professional angle steel tower manufacturers and suppliers in China. We warmly welcome you to buy customized angle steel tower made in China here from our factory. If you have any enquiry about OEM service, please feel free to email us.

angle steel tower, Telecom Lattice Tower, Communication Angle Steel Tower